NEW – THERMOCOUPLE LOGGER WITH LCD!
The USB-501-TC-LCD thermocouple data logger features an LCD display for on-location temperature readings. It supports K-, J-, and T-type thermocouples, and measures extreme temperatures between -200 and +1350°C.

NEW – DASYLab 11 FEATURES NEW GRAPHICAL DISPLAYS, GREATER CONTROL, AND MORE
Introducing DASYLab 11—the latest version of the graphical programming environment for test and measurement projects features intuitive worksheets, icons (or modules), and wire functions—complete test and measurement applications are only a few mouse clicks away. This powerful package is ideal for non-programmers.

NEW – 7000 SERIES FEATURES MESSAGE-BASED DAQ (MBD) PROTOCOL
Introducing the 7000 series—two new data acquisition products featuring a new O/S-independent protocol, Message-Based DAQ (MBD), that allows DAQ devices to be programmed with simple text-based messages. The USB-7202 and USB-7204 boards are multifunction measurement and control devices designed specifically for the MBD protocol. Intended primarily for OEM applications, both are shipped as open stackable PC/104-sized boards without enclosures. Volume discounts are available.

NEW – NEW HIGH-PERFORMANCE TEMPERATURE/RELATIVE HUMIDITY LOGGER
The high-performance USB-502-PLUS is a battery-powered temperature/humidity logger with superior accuracy. It is a cost-effective solution for both long- or short-term logging applications in which accuracy and small size are important. The USB-502-PLUS standalone data logger measures and stores up to 16,382 relative humidity and 16,382 temperature readings over the 0 to 100% RH and -35 to +80 °C (-31 to +176 °F) measurement ranges, and calculates dew point. Flashing LEDs indicate logging status, and a user-replaceable long-life lithium battery is included, which can typically allow up to one full year of logging.

NEW – 8-CHANNEL QUADRATURE ENCODER MODULE OUTPERFORMS THEM ALL
The high-performance USB-QUAD08 provides simultaneous input and decoding for up to eight incremental quadrature encoders at resolutions up to 48-bits. Its eight quadrature counters with indicator LEDs support both differential and single-ended inputs, and feature multiple programmable counting modes. The counters have less than 10 ns jitter, and accept input up to 10 MHz. The USB-QUAD08 can also serve as a high-speed pulse counter for general counting applications. The eight digital I/O bits support up to 42.4 Vpk/50 VDC with clamping diodes for CEMF suppression.

NEW – USB-1208HS
The USB-1208HS is a high-speed, multifunction DAQ module, featuring eight single-ended or four differential 13-bit, analog inputs with a sample rate of 1-MS/s. The input ranges available are ±10 V, ±5 V, ±2.5 V or 0 to10 V when in single-ended mode, and ±20 V, ±10 V, or ±5 V in differential mode. In addition to the analog inputs, it has 16 digital I/O lines, two 32-bit counters, and a 32-bit timer output. The USB-1208HS-2AO has two 12-bit analog outputs, and the USB-1208-4AO has four. Both are in the ±10 V range with an update rate up to 1 S/s. All versions are powered by the +5 volt USB supply from the host PC, and require no external power. All I/O connections are made to the screw terminals located along the sides of the device. A 2-meter long USB cable is included.

NEW – USB-2404-UI
The USB-2404-UI is a new universal input data acquisition device featuring four simultaneous sampling, 24-bit universal analog inputs at 100 S/s per channel, with 250 Vrms channel-to-channel and channel-to-ground isolation. Each channel is capable of measuring voltage, current, thermocouples, RTDs, resistance, or bridge-based sensors. Four 6-position spring terminal connectors allows different measurement types to be performed on each channel. Each channel includes a built-in thermistor for cold-junction compensation (CJC).