PCI-DUAL-AC5

$209.00

48-Channel, High-Drive, 64 mA Digital I/O Board with AC5/PB24 Interface

Key Highlights

48 digital I/O

Directly OPTO/GORDOS AC5/PB24 compatible

High current (64 mA) outputs

Controls 2 PB24 racks

Fully plug-and-play

Software

TracerDAQ® software included for acquiring and displaying data and generating signals

Universal Library includes support for Visual Studio® and Visual Studio® .NET, including examples for Visual C++®, Visual C#®, Visual Basic®, and Visual Basic® .NET

Comprehensive drivers for DASYLab® and NI LabVIEW™

Supported by MATLAB® Data Acquisition Toolbox™

InstaCal software utility for installation, calibration, and testing

Please Register or Login to view the product Data Sheet and User's Manual in PDF format.

[+] View Larger Image

Pricing
Overview
Related Products
Included/Optional Software
More Info

Part Number	Description	Price	Quantity	Purchase
Prices shown are in U.S. dollars for orders placed within the U.S. For international orders, please contact one of our distributors in your area.
PCI-DUAL-AC5	PCI-based 48-channel, high-drive, 64 mA digital I/O board with AC5/PB24 interface	$209.00		Add to cart
Signal Conditioning Options
SSR-PB24	Solid-state relay backplane, 24-channel	$129.00		Add to cart
Accessories & Cables
C100FE-2	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 2 ft. More Options...	$55.00		Add to cart
C100FE-1	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 1 ft.	$55.00		Add to cart
C100FE-10	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 10 ft.	$103.00		Add to cart
C100FE-15	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 15 ft.	$133.00		Add to cart
C100FE-20	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 20 ft.	$163.00		Add to cart
C100FE-25	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 25 ft.	$193.00		Add to cart
C100FE-3	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 3 ft.	$61.00		Add to cart
C100FE-4	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 4 ft.	$67.00		Add to cart
C100FE-5	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 5 ft.	$73.00		Add to cart
C100FE-50	Cable, 50-conductor ribbon, PCI-DUAL-AC5 to SSR-PB24, 50 ft.	$343.00		Add to cart
C100FF-5	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 5 ft. More Options...	$73.00		Add to cart
C100FF-1	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 1 ft.	$55.00		Add to cart
C100FF-10	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 10 ft.	$103.00		Add to cart
C100FF-15	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 15 ft.	$133.00		Add to cart
C100FF-2	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 2 ft.	$55.00		Add to cart
C100FF-20	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 20 ft.	$163.00		Add to cart
C100FF-25	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 25 ft.	$193.00		Add to cart
C100FF-3	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 3 ft.	$61.00		Add to cart
C100FF-4	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 4 ft.	$67.00		Add to cart
C100FF-50	Cable, 50-conductor ribbon, 100-pin, high-density to two 50-pin IDC, 50 ft.	$343.00		Add to cart
SCB-50	Signal connection box, two independent (side-by-side) sets of 50 screw terminals, each connected one-to-one to a 50-pin header for ribbon cable mating More Options...	$199.00		Add to cart
CIO-MINI50	Universal screw-terminal board, 50-pin	$79.00		Add to cart
CIO-TERM100	Universal screw-terminal board, 100 terminals, for use with high-density digital I/O boards, positions for pull-up resistors	$159.00		Add to cart
Software
DASYLab^® LITE	DASYLab Lite includes all drivers, comes without analysis, limited module count, and includes one Layout Window More Options...	$499.00		Add to cart
DASYLab^® BASIC	DASYLab Basic includes all drivers, all standard modules (except Signal Analysis and Actions), and one Layout Window	$1,299.00		Add to cart
DASYLab^® FULL	DASYLab Full includes all drivers, all standard modules, 200 Layout Windows, and Control Sequencer	$1,799.00		Add to cart
DASYLab^® PRO	DASYLab Pro includes all drivers, DASYLab Full version, plus all add-on modules (without third-party modules)	$2,499.00		Add to cart
DASYLab^® RUNTIME	DASYLab Runtime allows you to run an existing worksheet application on an additional computer (with compatible hardware configurations)	$449.00		Add to cart
DASYLab^® UPD Basic	DASYLab upgrade to the latest Basic license	$259.00		Add to cart
DASYLab^® UPD Full	DASYLab upgrade to the latest Full license	$359.00		Add to cart
DASYLab^® UPD Lite	DASYLab upgrade to the latest Lite license	$99.00		Add to cart
DASYLab^® UPD Pro	DASYLab upgrade to the latest Pro license	$499.00		Add to cart
DASYLab^® UPD RT	DASYLab upgrade to the latest Runtime license	$99.00		Add to cart
TracerDAQ® Pro	Out-of-the-box virtual instrument suite with strip chart, oscilloscope, function generator, and rate generator – professional version	$199.00		Add to cart

Measurement Computing's PCI-DUAL-AC5 is a 48-bit, high output, digital I/O board for PCI-compatible computers. Primarily designed as a direct interface to the industry-standard SSR-PB24 rack, the board is also highly useful as a general purpose digital I/O board.

The 48-bits of digital I/O are organized into two 24-bit groups based on an 82C55 mode 0 emulation (no strobed I/O or bi-directional I/O bits). Each 24-bit group is divided into three eight-bit ports labeled PORTA, PORTB and PORTC. PORTC can be split into two four-bit nibbles - Port C-HI and Port C-LO. Each of these ports may be individually programmed as input or output.

All inputs and outputs are TTL compatible. The digital output drivers are 74S244 chips that can sink 64 mA and source 15 mA. The input buffers are 74LS373 chips and have standard high input impedance of the 74LS series devices. All I/O is brought out to a 100-pin connector, which also allows connection to the PC's +5 Volt and Ground.

On power up and reset, all I/O bits are set to input mode. If you are using the board to control items that must be OFF on reset, install pull-down resistors. Each board is equipped with open locations where you can install SIP resistor networks for either pull-up or pull-down.

The PCI-DUAL-AC5 board is completely plug-and-play, with no jumpers or switches to set. All board addresses and interrupt sources are set by the board’s plug-and-play software. Board configuration is controlled by your system’s BIOS.

Part Number	Description	Price	Quantity	Purchase
Prices shown are in U.S. dollars for orders placed within the U.S. For international orders, please contact one of our distributors in your area.

Included Software
	InstaCal Installation, calibration, and test software in one package simplifies these important steps as you turn your PC into a measurement system. Installation detects new hardware and configures your computer and board. Calibration software automates this critical step and keeps your measurements accurate. Test routines verify that all the board's features are operating, and will speed you to a quick resolution. If you need to, call our free technical support. Included free with every board.
	TracerDAQ^® TracerDAQ is an out-of-the-box application that allows data to be generated, acquired, analyzed, displayed and exported within seconds of installing Measurement Computing data acquisition hardware. TracerDAQ has been completely redesigned to provide significant performance and feature improvements over previous versions. It now offers four different data acquisition applications; a Strip Chart, an Oscilloscope, a Function Generator and a Rate Generator, all of which are accessed via a common, easy-to-use menu page. TracerDAQ is provided standard with all Measurement Computing PCI-and USB-based data acquisition products to get customers up and running quickly and efficiently.
	ULx for NI LabVIEW™ Advanced Driver for use with NI LabVIEW™ 8.5 – 2011. Allows quick development of instrumentation, acquisition, and control applications with Measurement Computing hardware devices
	Universal Library Programming libraries for Windows® Visual Studio® programming languages, and others. A complete function library to simplify the configuration and operation of your measurement board. A single, universal set of functions operates all our products so you only have to learn to use our library once.

Optional Software
	DASYLab^® Software lets you interactively develop PC-based data acquisition applications by simply attaching functional icons. DASYLab offers real-time analysis, control, and the ability to create custom graphical user interfaces (GUIs). What’s more, in contrast to other graphical programming environments, which can require weeks of training to master, DASYLab has a very short user-learning curve. Many applications can be configured in a few minutes, rather than days or weeks.
	MATLAB® Support for MCC Products – MATLAB® is a software environment for data acquisition, data analysis, and application development. MATLAB supports MCC hardware by using the MATLAB® Data Acquisition Toolbox™. MATLAB supports the data acquisition and analysis process along with interfacing with data acquisition devices and instruments, analyzing and visualizing the data. It also produces presentation-quality reports to share results with others.
	TracerDAQ® Pro Provides four virtual instrument applications used to graphically display and store input data – and generate output signals – within minutes of installing Measurement Computing data acquisition hardware. The applications allow the user to customize appearance, store configurations for future use, save data to a file for export and – with the use of interactive hotspots – change settings while the application is running.

The Following Resources are Available:

Product Data Sheets – Here you will find a listing of current Product Data Sheets which provide a general overview of product features and specifications from both Measurement Computing and IOtech.

Product User's Manuals – Here you will find the latest product User's Manuals and Quick Start guides.

Technical Support – Measurement Computing offers free technical support and a variety of product support options online.

Product Application Notes – Here you will find a collection of IOtech's test and measurement systems and instruments
used in a variety of actual customer applications and environments.

Download Latest Software – Visit our FTP site to obtain the latest software drivers, libraries, and evaluation packages.

Repairs and Warranties – Learn more about our Repair and Calibration services, Limited Lifetime Product Warranty, and Limited Lifetime Harsh Environment Program