6000 Series

Voltage, Temperature, and Strain Ethernet Systems

KEY HIGHLIGHTS

The 6000 Series of Ethernet data acquisition (DAQ) devices provide simultaneous analog input along with digital I/O. Each device features an A/D per channel, and support for voltage, temperature, or strain measurements.

Analog Input
Channels Resolution Max Sample Rate Sampling
12 Up to 24-bit Up to 100 kS/s/ch Simultaneous
Ranges Isolation
±60 V, ±10 V, ±80 mV, ±25 mV/V ch-ch (6230 and 6231)
Sensor
Thermocouple RTD Bridge-Based Voltage
6222 6224 6220, 6222, 6230, 6231
Analog Output
Channels Resolution Speed
Digital I/O
Channels Counter/Timers Encoder
8 4/—
Software Power
OS Support Drivers Power
Windows® Encore External


Part Number Description Qty Price
6220 12-channel, 16-bit resolution, Ethernet-based voltage measurement module, with included Out-of-the-Box Encore software
$3,299.00
6222 12-channel, 24-bit ADC, Ethernet-based thermocouple input module, with included Out-of-the-Box Encore software
$2,529.00
6224 12-channel, 24-bit resolution, Ethernet-based strain measurement module, with included Out-of-the-Box Encore software
$4,799.00
6230 12-channel, 24-bit ADC, Ethernet-based high-speed ±10 V isolated voltage input module, with included Out-of-the-Box Encore software
$4,399.00
6231 12-channel, 24-bit ADC, Ethernet-based high-speed ±60 V isolated voltage input module, with included Out-of-the-Box Encore software
$4,729.00
Accessories & Cables
190658A-01 Stacking plate kit
$49.00
CA-192-7C Ethernet crossover cables, 2.133 meter (7 ft.)
$33.00
CA-242 Ethernet patch cable, 0.609 meter (2 ft.)
$30.00
CA-242-7 Ethernet patch cable, 2.133 meter (7 ft.)
$33.00
CA-74-1 RJ12 shielded cable, 6 conductor, SYNC bus, 0.3 meter (1 ft.)
$49.00
CN-268 RJ50, 12-pin screw-terminal connector, 4 pack (for 6224 model). 3 sets of CN-268, CN-269 or CN-270 are included with 6224, user must specify which at time of order. Used with full and half-bridge measurements.
$209.00
CN-269 RJ50, 120 Ohm quarter-bridge connector, 4 pack (for 6224 model). 3 sets of CN-268, CN-269 or CN-270 are included with 6224, user must specify which at time of order.
$209.00
CN-270 RJ50, 350 Ohm quarter-bridge connector, 4 pack (for 6224 model). 3 sets of CN-268, CN-269 or CN-270 are included with 6224, user must specify which at time of order.
$209.00
HA-210-5-BK Handle kit, black
$30.00
TR-60U External power supply, 90 to 264 VAC; requires additional cable, CA-1 (US) or CA-216 (European)
More Options...
$55.00
CA-1 Required cable for use with TR-xx external power supply; US version $15.00
CA-216 Required cable for use with TR-xx external power supply; European version $25.00

Product Reviews




We are being strongly encouraged for new Ethernet equipment that it support IPv6. What is your status on this issue>

  • Job Title: Metallurgist
  • Industry:
  • Application:
29 months ago
JoesBar Albany, OR, USA


Answers

Hello - The 6000 Series uses IPv4.

29 months ago
MeasurementComputing

Was this answer helpful? Yes (0) / No (0)

I want to connect a two wire 120ohm strain gage via the RJ5012 Pin Screw Terminal Accessory (CN268). I have a 120ohm resistor to form the quarter bridge but cannot find detailed information on the screw connections needed to the CN268. is there any additi

  • Job Title:
  • Industry:
  • Application:
29 months ago
nj12


Answers

Hello nj12 - The connection diagram is molded into the side of the CN268. It shows that one side of the gauge is connected to pin 0 and the other side goes to both pin 1 & pin 2. For best results run two wires to the other side of the gauge – don’t run one and then jumper a wire across pins 1 & 2.

28 months ago
MeasurementComputing

Was this answer helpful? Yes (1) / No (0)

Hi, Is the 6230 supported for application development in the Visual Studio environment (unmanaged C#). Do you provide examples of working with it in the specific environment? Regards, Dimitris

  • Job Title: Technical Manager
  • Industry: Telecoms
  • Application: Signal processing
25 months ago
Dimitris Athens, Greece


Answers

Hello Dimitris – Unfortunately there is no programming support for the IOtech 6000 Series devices (they’re supported through Encore only).

25 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

Included Software


  • Encore Interactive measurement software for Out-of-the-Box setup, acquisition, display, logging, analysis, and reporting

Product Manuals


6220
document
 
6222
document
 
6224
document
 
6230
document
 
6231
document
 

 

Product Videos


MCC Video Library
video
 

 

Programming Example Downloads      download

1 Year Warranty

1 Year Warranty

All products are backed with a one year warranty. Buy with confidence.

30 Day Money Back Guarantee

30-Day
Guarantee

If you aren’t happy, simply return the product for a full refund (U.S. customers only).

Live Help

Live Help

Having trouble deciding which product is right for your application? Chat with one of our sales engineers.