DBK43B

$2,999.00

8-Channel Strain Gage Module with Screw Terminals

Key Highlights

Provides 8-channels of strain gage input

Accommodate most bridge-type sensors, including 4-element full and 3-wire quarter bridges

Contain an individual excitation regulator per channel, and a user-selected low-pass filter

Screw-terminal connection

Please Register or Login to view the product Data Sheet and User's Manual in PDF format.

[+] View Larger Image

Pricing
Overview
Supported Products
More Info

Part Number	Description	Price	Quantity	Purchase
Prices shown are in U.S. dollars for orders placed within the U.S. For international orders, please contact one of our distributors in your area.
DBK43B	8-Channel Strain Gage Module with Screw Terminals	$2,999.00		Add to cart
Accessories & Cables
BCR/1000/1	1000 Ohm bridge resistor	$10.00		Add to cart
BCR/120/1	120 Ohm bridge resistor	$10.00		Add to cart
BCR/350/1	350 Ohm bridge resistor	$10.00		Add to cart
CA-132	Set of eight 6 ft. cables with mating mini-DIN 6 connector	$110.00		Add to cart
CA-255-2T	Molded T expansion cable, 2 in.	$70.00		Add to cart
CA-255-4T	Molded T expansion cable, 4 in.	$70.00		Add to cart
CN-115	Header connector	$6.00		Add to cart
CA-37-1	Ribbon cable for use with 1 DBK device attached, 7 in. More Options...	$55.00		Add to cart
CA-37-2	Ribbon cable for use with two DBK devices attached	$70.00		Add to cart
CA-37-3	Ribbon cable for use with three DBK devices attached	$80.00		Add to cart
CA-37-4	Ribbon cable for use with four DBK devices attached	$90.00		Add to cart
CA-37-5	Ribbon cable for use with five DBK devices attached	$99.00		Add to cart
CA-37-6	Ribbon cable for use with six DBK devices attached	$110.00		Add to cart
CA-37-7	Ribbon cable for use with seven DBK devices attached	$120.00		Add to cart
CA-37-8	Ribbon cable for use with eight DBK devices attached	$130.00		Add to cart

Summary
IOtech's DBK43B is a strain gage interface module with screw-terminals, that accommodates the connection of most strain gage types, from single-element quarter bridges to 4-element full bridges. This module allows on-board mounting of bridge completion resistors and provides four adjustments on each of its 8-channels. You can adjust the excitation voltage on each channel from 1.5 to 10.5 VDC. You can also adjust the input gain, offset, and scaling gain on each channel to null any quiescent loads and expand the dynamic range for maximum measurement resolution. Other per-channel options include AC or DC coupling and a low-pass filter with a user-customizable cutoff frequency.

Part Number	Description	Price	Quantity	Purchase
Prices shown are in U.S. dollars for orders placed within the U.S. For international orders, please contact one of our distributors in your area.
DaqBoard/2000	PCI data acquisition board, 200 kHz with 16SE/8DE inputs, 40 DIO, 4 CTR, 2 analog outputs	$879.00		Add to cart
DaqBoard/2001	PCI data acquisition board, 200 kHz with 16SE/8DE inputs, 40 DIO, 4 CTR, and 4 analog outputs	$1,269.00		Add to cart
DaqBoard/2005	PCI data acquisition board, 200 kHz with 16SE/8DE inputs, 40 DIO, and 4 CTR	$759.00		Add to cart
DaqBook/2001	Ethernet-based 200 kHz data acquisition system with 16 SE/8 DE inputs (expandable to 256), 40 DIO, 4 CTR, 4 analog outputs	$3,299.00		Add to cart
DaqBook/2005	Ethernet-based 200 kHz data acquisition system with 16 SE/8 DE inputs (expandable to 256), 40 DIO, and 4 CTR	$2,749.00		Add to cart
DaqBook/2020	Ethernet-based 200 kHz data acquisition system with 16 DE inputs (expandable to 256) and 14 thermocouple inputs, 24 DIO, 4 CTR, and 4 analog outputs	$5,499.00		Add to cart
DaqLab/2001	Ethernet-based 200 kHz laboratory data acquisition system with 8 inputs (expandable to 128), 30 DIO, 4 CTR, and 4 analog outputs	$2,199.00		Add to cart
DaqLab/2005	Ethernet-based 200 kHz laboratory data acquisition system with 8 inputs (expandable to 128), 30 DIO, and 4 CTR	$1,869.00		Add to cart
DaqOEM/2001	Ethernet-based data acquisition board, 200 kHz with 16 SE/8 DE inputs, 40 DIO, 4 CTR, and 4 analog outputs	$1,999.00		Add to cart
DaqOEM/2005	Ethernet-based data acquisition board, 200 kHz with 16 SE/8 DE inputs, 40 DIO, and 4 CTR	$1,649.00		Add to cart
DaqScan/2001	Ethernet-based, 200 kHz rack mountable data acquisition system with 16 SE/8 DE inputs (expandable to 256), 40 DIO, 4 CTR, and 4 analog outputs	$2,749.00		Add to cart
DaqScan/2005	Ethernet-based, 200 kHz rack mountable data acquisition system with 16 SE/8 DE inputs (expandable to 256), 40 DIO, and 4 CTR	$2,199.00		Add to cart

The Following Resources are Available:

Product Data Sheets – Here you will find a listing of current Product Data Sheets which provide a general overview of product features and specifications from both Measurement Computing and IOtech.

Product User's Manuals – Here you will find the latest product User's Manuals and Quick Start guides.

Technical Support – Measurement Computing offers free technical support and a variety of product support options online.

Product Application Notes – Here you will find a collection of IOtech's test and measurement systems and instruments
used in a variety of actual customer applications and environments.

Download Latest Software – Visit our FTP site to obtain the latest software drivers, libraries, and evaluation packages.

CE Information – Here you will find declaration of conformity documents on IOtech products.

Repairs and Warranties – Learn more about our Repair and Calibration services, Limited Lifetime Product Warranty, and Limited Lifetime Harsh Environment Program