|
UL for Linux
User library to access and control supported MCC hardware over the Linux platform
|
|
UL for Linux
User library to access and control supported MCC hardware over the Linux platform
|
The USB-1608HS Series includes the following devices:
The USB-1608HS Series supports the following UL for Linux capabilities.
| Channels: | 0 to 7 |
| Input modes: | AI_DIFFERENTIAL, AI_SINGLE_ENDED |
| Ranges: | BIP10VOLTS, BIP5VOLTS, BIP2VOLTS, BIP1VOLTS |
| Scan options: | SO_DEFAULTIO, SO_SINGLEIO, SO_BLOCKIO, SO_CONTINUOUS, SO_EXTCLOCK, SO_EXTTRIGGER, SO_RETRIGGER |
| Scan rates: | 0.0093 to 250,000 S/s |
| Trigger types: | TRIG_HIGH, TRIG_LOW, TRIG_POS_EDGE, TRIG_NEG_EDGE, TRIG_ABOVE, TRIG_BELOW |
| Functions: | ulAIn(), ulAInScan(), ulAInLoadQueue(), ulAInScanStatus(), ulAInScanStop(), ulAInScanWait(), ulAInSetTrigger() |
| Configuration: | none |
| Channels: | 0 to 1 |
| Ranges: | BIP10VOLTS |
| Scan options: | SO_DEFAULTIO,SO_BLOCKIO, SO_CONTINUOUS |
| Scan rates: | 0.59604 to 1,000,000 |
| Functions: | ulAOut(), ulAOutArray(), ulAOutScan(), ulAOutScanStatus(), ulAOutScanStop(), ulAOutScanWait() |
| Configuration: | Config Item (Get/Set): AO_CFG_CHAN_SENSE_MODE |
| Ports: | AUXPORT0, AUXPORT1 | |
| Bits: | 0 to 7 | |
| Functions: | ulDIn(), ulDOut(), ulDBitIn(), ulDBitOut() | |
| Configuration: | none |
| Counter argument: | 0 |
| Functions: | ulCIn(), ulCRead(), ulCLoad(), ulCClear() |
| Configuration: | none |
| Event types: | DE_ON_DATA_AVAILABLE, DE_ON_END_OF_INPUT_SCAN, DE_ON_INPUT_SCAN_ERROR, DE_ON_END_OF_OUTPUT_SCAN, DE_ON_OUTPUT_SCAN_ERROR |
| Functions: | ulEnableEvent(), ulDisableEvent() |
| Functions: | ulFlashLed() |
| Configuration: | none |
1.8.8
