|
UL for Linux
User library to access and control supported MCC hardware over the Linux platform
|
|
UL for Linux
User library to access and control supported MCC hardware over the Linux platform
|
The USB-200 Series includes the following devices:
The USB-200 Series supports the following UL for Linux capabilities.
| Channels: | 0 to 7 |
| Input modes: | AI_SINGLE_ENDED |
| Ranges: | BIP10VOLTS |
| Scan options: | SO_DEFAULTIO, SO_SINGLEIO, SO_BLOCKIO, SO_CONTINUOUS, SO_EXTCLOCK, SO_EXTTRIGGER |
| Scan rates: | USB-201 and USB-202: 0.0162 to 100,000 S/s USB-204 and USB-205: 0.0162 to 500,000 S/s |
| Trigger types: | TRIG_HIGH, TRIG_LOW, TRIG_POS_EDGE, TRIG_NEG_EDGE |
| Functions: | ulAIn(), ulAInScan(), ulAInLoadQueue(), ulAInScanStatus(), ulAInScanStop(), ulAInScanWait(), ulAInSetTrigger() |
| Configuration: | none |
| Channels: | 0 to 1 |
| Ranges: | UNI5VOLTS |
| Functions: | ulAOut() |
| Configuration: | none |
| Ports: | AUXPORT |
| Bits: | 0 to 7 |
| Functions: | ulDIn(), ulDOut(), ulDBitIn(), ulDBitOut(), ulDConfigPort(), ulDConfigBit(), ulDIOGetConfig() |
| Configuration: | Config Item (Get): DIO_CFG_PORT_DIRECTION_MASK |
| Counter argument: | 0 |
| Functions: | ulCIn(), ulCRead(), ulCLoad(), ulCClear() |
| Configuration: | none |
| Event types: | DE_ON_DATA_AVAILABLE, DE_ON_END_OF_INPUT_SCAN, DE_ON_INPUT_SCAN_ERROR, DE_ON_END_OF_OUTPUT_SCAN, DE_ON_OUTPUT_SCAN_ERROR |
| Functions: | ulEnableEvent(), ulDisableEvent() |
| Functions: | ulFlashLed() |
| Configuration: | none |
1.8.8
