Monitoring TCs and counting line cycles for a life test operating up to 10khr but also need to monitor AC voltage. Need small ethernet capable package to do this. E-TC would seem ideal except for no analog input for line voltage measurement. Is there a solution that can do this similar to the E-TC?
- Job Title: Driector
- Industry: Lighting
- Application: Life test monitoring
30 months ago
Ron323
Boston, MA
Answers
You are correct in that the E-TC will not support an AC input. You could, however, use the E-TC and our E-1608 for your voltage measurements. Please be aware in that the E-1608 supports a max input range of +-10 VDC or Volts-Peak so your AC signal will need to be conditioned prior to using the E-1608 DAQ device.
30 months ago
Measurement Computing
Was this answer helpful?
Yes (0) /
No
(0)