Skip Navigation LinksHome  /  PCI and PCIe Data Acquisition  /  PCIe-DAS1602-16

PCIe-DAS1602/16

REVIEWS (1)
 

Multifunction PCI Express Board

PCIe-DAS1602/16
zoom

 

document Product Data Sheets - (PDF printable)
document User's Manual - (PDF printable)
download Software and Driver Downloads

KEY HIGHLIGHTS

**Not recommended for new applications. Please consider the USB-1608G Series instead.**

The PCIe-DAS1602/16 data acquisition (DAQ) board provides multifunction measurement options for the PCI Express bus. Features include analog input and output, digital I/O, and counter measurements.

Analog Input
Channels Resolution Max Sample Rate
16 SE/8 DIFF 16-bit 100 kS/s
Sampling Ranges Isolation
Multiplexed ±10 V, ±5 V, ±2.5 V, ±1.25 V, 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V —
Analog Output
Channels Resolution Speed
2 12-bit System dependent
Digital I/O
Channels Counter/Timers Encoder
32 3 —
Software Power
OS Support Drivers Power
Windows® and Linux® Universal Library™ SW Suite Bus powered

Part Number Description Price
PCIe-DAS1602/16 PCI Express data acquisition (DAQ) board with 16 SE/8 DIFF analog inputs, 16-bit resolution, up to 100 kS/s sample rate, two 12-bit analog outputs, three 16-bit counters, and 32 digital I/O.
Qty:
 $1,119.00
Related Products
PCIe-DIO24 24-channel, PCI Express (PCIe) bus compatible digital I/O board.
**Not recommended for new applications. Please consider the USB-DIO24 Series instead.**
Qty:
 $379.00
PCIe-DIO96H 96-channel, high-drive, 64 mA PCI Express (PCIe) digital I/O board.
**Not recommended for new applications. Please consider the USB-DIO96H instead.**
Qty:
 $609.00
Signal Conditioning Options
SSR-RACK08 Solid state relay backplane (Gordos/OPTO-22 type relays), 8-channel
close More Options...     User's Manual User Manual   
Qty:
 $114.00
SSR-RACK24 Solid state relay backplane (Gordos/OPTO-22 type relays), 24-channel.
**Not recommended for new applications. Please consider the USB-ERB24 instead.**
close More Options...     User's Manual User Manual   
Qty:
 $199.00
ISO-DA02 5B module backplane for CIO-DAC02, PCIM-DAS1602/16, and PCIe-DAS1602/16, 2-channel
   
Qty:
 $93.00
ISO-RACK16 Isolation module backplane for DAS16 Series, 16-channel
    User's Manual User Manual   
Qty:
 $240.00
Accessories & Cables
C37FF-2 Cable, 37-conductor ribbon, female to female, 2 ft.
More Options...
Qty:
 $35.00
C37FF-10 Cable, 37-conductor ribbon, female to female, 10 ft.
Qty:
 $62.00
C37FFS-5 Cable, 37-conductor shielded, female to female molded connectors, 5 ft.
More Options...
Qty:
 $47.00
C37FFS-10 Cable, 37-conductor shielded, female to female molded connectors, 10 ft.
Qty:
 $59.00
CIO-MINI37 Universal screw-terminal board, 37-pin (view dimensional drawing)
Qty:
 $99.00
CIO-MINI37-VERT Universal screw-terminal board, 37-pin D male connector, vertical
Qty:
 $99.00
SCB-37 Signal connection box, 37-conductor, shielded
Qty:
 $220.00
Software
DASYLab® LITE Icon-Based Data Acquisition, Graphics, and Control Software
More Options...
Qty:
 $499.00
DASYLab® BASIC Icon-Based Data Acquisition, Graphics, Control, and Analysis Software. Includes standard analysis modules and unlimited module count. - Most Popular
Qty:
 $1,299.00
DASYLab® FULL Icon-Based Data Acquisition, Graphics, Control, and Analysis Software. Includes all DASYLab Basic features plus standard modules, 200 layout windows, unlimited module count, and control sequencer.
Qty:
 $1,799.00
DASYLab® PRO Icon-Based Data Acquisition, Graphics, Control, and Analysis Software. Includes all DASYLab Full features plus advanced signal analysis and control modules.
Qty:
 $2,499.00
DASYLab® RUNTIME DASYLab Runtime allows you to run an existing worksheet application on an additional computer (with compatible hardware configurations)
Qty:
 $449.00
TracerDAQ® Pro Out-of-the-box virtual instrument suite with strip chart, oscilloscope, function generator, and rate generator – professional version
**Not recommended for new applications. Please consider the DAQami instead.**
Qty:
 $199.00

Product Reviews


5 / 5
Ease of Use
5 / 5
Value
4 / 5
Technical Support
5 / 5

100% of new reviewers recommend this product

PCIe-DAS1602/16
August 05, 2014
excellent

this is one of the best products I have ever used. I am always impressed by the knowledge of the technical support people and there willingness to go the extra mile to help.

  • Job Title: president
  • Industry: control
  • Application: measurment
  • From: Montgomery, IL, USA
  • Company Size: 1-100
  • Software Used: NI LabVIEW
  • Ease of use
  • Value
  • Technical Support
Yes, I recommend this product!

Was this review helpful? Yes (3) / No (0)




Could you please specify the current limit for the +5V (pin 1) on both connectors? Is there an electronic short circuit protection?

  • Job Title: System Engineer
  • Industry:
  • Application:
73 months ago
Chris Germany


Answers

If there is no short circuit protection and the +5V are from the mainboard, then there is no reason to limit it to 10mA. For our application, we need ca. 200mA. Do you see a problem with that?

73 months ago
Chris

Was this answer helpful? Yes (1) / No (0)

Hello Chris - The +5V pins are not short circuit protected. The published spec is 10 mA total for all of the +5V pins, but that is very conservative, and very likely more current can be supplied. Please contact [email protected] if you have specific current requirements.

73 months ago
Measurement Computing

Was this answer helpful? Yes (1) / No (0)

For the +5V pin on either connector, there is no short circuit protection. We spec 10 mA for each.

73 months ago
Measurement Computing

Was this answer helpful? Yes (1) / No (0)

What is the relation between the -5V REF OUT voltage and the A/D converter reference voltage - is it the same voltage reference? I would like to use it to supply several potentiometers, by this having the A/D converted values independent from fluctuation of the supply voltage (since it should be also the reference voltage for the A/D converter). What is the max. current that can be drawn? Is this output short circuit protected? I assume the +5V is just the voltage from the mainboard.

  • Job Title: System Engineer
  • Industry:
  • Application:
73 months ago
Chris Germany


Answers

The -5V REF OUT (pin 8) is not the reference for the A/D. 10 mA is its output spec. Yes that output is short circuit protected. Yes, the +5V (pin 1) is pretty much direct from the mainboard.

73 months ago
Measurement Computing

Was this answer helpful? Yes (1) / No (0)

When I run Instacal with the board PCIe-DAS1602/16, I am able to do some analog test but I can't do it on digital I/O. How to test digital I/O on this board ?

  • Job Title:
  • Industry:
  • Application:
94 months ago
bent


Answers

InstaCal can test the 4 DO bits that are on the main connector, by using them in the analog loopback test. But InstaCal cannot test the 4 DI bits on the main connector, nor the 24 bits on the auxiliary connector. We do have a separate test program for the 24 auxiliary bits at the following link: ftp://ftp.mccdaq.com/downloads/example_programs/82C55_Tester/

94 months ago
MeasurementComputing

Was this answer helpful? Yes (1) / No (0)

This is a e-mail from China. I can't find the right pin when I used DIO of this PCIe board in matlab. Because I want to send a digital singnal to a electromagnetic valve . How can solve this problem? Thank you very much. >> dio = digitalio('mcc',0) Disp

  • Job Title:
  • Industry:
  • Application:
106 months ago
xinjian8908


Answers

Hello xinjian8908 - This model hardware has 5 possible digital output ports: Auxport, FirstPortA, FirstPortB, FirstPortCL, and FirstPortCH. The pinout can be found at the end of the hardware manual PDF. Your question, on which ports are supported as output in MATLAB, and how to achieve that, would need to be directed towards the Mathworks.

106 months ago
MeasurementComputing

Was this answer helpful? Yes (1) / No (0)

Included Software

  • TracerDAQ® for acquiring and displaying data and generating signals
  • InstaCalTM software utility for installing, configuration, and testing
  • Universal Library includes support for Visual Studio® and Visual Studio®.NET, including examples for Visual C++®, Visual C#®, and Visual Basic®.NET
  • ULx for NI LabVIEWTM Library of VIs and example programs to speed your NI LabVIEW development
  • Linux® Support for MCC DAQ products

Optional Software

  • DASYLab® Software lets you interactively develop PC-based data acquisition applications by simply attaching functional icons
  • TracerDAQ®Pro - Out-of-the-box virtual instrument suite with strip chart, oscilloscope, function generator, and rate generator – professional version
  • MATLAB® Support for MCC Products - Software Environment for Data Acquisition, Data Analysis, and Application Development

Product Manuals

PCIe-DAS1602/16
document
 

 

Quick Start Guide

DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 
ULx for NI LabVIEW™
QS ULx for NI LabVIEW.pdf
 

 

 

 

Programming Example Downloads      download

Product Videos

MCC Video Library
video
 
1 Year Warranty

1 Year Warranty

All products are backed with a one year warranty. Buy with confidence.

30 Day Money Back Guarantee

30-Day
Guarantee

If you aren’t happy, simply return the product for a full refund (U.S. customers only).

Live Help

Live Help

Having trouble deciding which product is right for your application? Chat with one of our sales engineers.